Hand Operated Milking Machine With Sitting Area
Hand Operated Milking Machine With Sitting Area
NK DAIRY EQUIPMENTSAddress : Kamani Chowk, Workshop Road, Oppostie Oberoi Juice & Milk Bar , yamunanagar , Haryana , ( 135001 )India
Product Details:
Product Type: Automatic
Brand Name: N K Dairy Equipments
Packaging: 350 mm
Composition / Material Type: stainless steel trolley with polymer wheels
Usages: Human Use
Get Latest Price

By keeping track with the latest fashion trends, we are bringing forward an attractive range of Battery Operated Milking Machine.

Other Details:

Motor power: 150 watt, (12 volt DC)

Battery size: 35 Ah

Min Battery voltage: 12 Volts

Dry weight: 38 kg without battery

Time for milking: 4 to 7 min/cow

Vacuum level: 350 mm Hg max

Pulsing: Alternating (two teats/stroke)

Pulse rate: 72/ min

Cleaning method: Pumping Boiling water and cleaning

agents Mounting: On stainless steel trolley with polymer wheels

Adaptability: One animal at a time


High performance Excellent functionality Easy to operate

How to operate:

Before milking clean the milk can, inside of teat liners and milk pipe by dipping the teat liner cluster in clean water and operating the machine Flush out the water from liner and milk can Close can lid and cluster, ensure the clips are secured in place.

Before closing the milk can shake the can lid to ensure the float is freely moving inside valve before closing the milk can to confirm non return valve is not locked. If the float is not moving remove the vacuum pipe (small pipe) and fit again Keep the ball valve of teat adapter cluster open and switch on the machine then close ball valve Wait till vacuum gauge shows 200 to 250 mm of Hg reading Meanwhile prepare cow for milking by cleaning and massaging the udder Once animal is stimulated for letdown, hold the teat adapter cluster in one hand and insert the teat into teat liners of teat adapter cluster Slowly open the ball valve of teat adapter cluster and teat adapter will clutch on teats and udder of animal Leave teat adapter cluster to hang on udder while the machine is running When milk flow in pipe becomes less after three or four min, slightly pull the cluster assembly down to exert extra force on udder while operating the pump, which helps to drain the milk quickly. Let the machine run continuously until milk flow in transparent pipe stops After milk is completely drained hold the teat adapter cluster and closed the ball valve Insert finger in between teat liner and teat The test adapter cluster declutches To milk another animal repeat step 4 to 11 The milk can capacity is 20 LTR Do not fill the can completely to avoid milk entering air circuit in case of non-return valve malfunction Cleaning Process: Take 3 Liter boiling water in bucket close the lid of milk can Dip teat adapter cluster in boiling water Switch on and run the milking machine and boiling water flows thru the milk pipe into milk can While water flows through, gently lift and dip the cluster in water so that water gets blasted inside Use enough boiling water (about three liter) to clean the machine thoroughly Open the teat adapter cluster and milk can, wash it thoroughly If required use mild detergent and brush. Hang the teat adapter cluster in shade and keep the machine in a cool place away form direct sun light Remove water from air filter once in a day Caution: Do not dip can lid in water and operate the machine Do not dip open pipe in water and operate the machine Periodic Maintenance: Once in a week clean the inside of milking pipe Once in 60 days do greasing on the O-rings with high vacuum grease Use vacuum grease provided with machine (Do not block the air vent in piston with grease as it will reduce the efficiency of machine) Change the O-rings and air filter after one year

Click more
A Product of Piegon Media Pvt. Ltd.